Cryorig H7 Plus Dual Fan Cpu Cooler Review
Cryorig's coolers are aught like a typical industrial looking pattern but they are unlike not in terms of the blueprint but likewise overall aesthetics and appeal of the products. Their coolers like H7 and R1 Universal are quite popular among budget users and enthusiasts respectively. They are also producing CLC though I have yet to review them. Earlier, I had reviewed their R1 Ultimate and like the name suggests, information technology is Ultimate in thermal performance and correct on the money.
Cryorig H7 CPU Libation Review
Today, I will be looking at their budget level only highly popular Cryorig H7 Review. The Cryorig has recently released the upgraded (in terms of aesthetics) version of this cryorig h7 review cooler named H7 Quad Lumi with RGB bells and whistles to it. The H7 is a 120mm heatsink, single tower featuring their Hive Fin design for improve and quicker cooling, optimized oestrus pipe coverage using the convex alignment of the heat pipes in the base of operations, and unparalleled 0 RAM incompatibility.
The cooler has the meridian of 145mm and it is compatible with the majority of the PC Chassis out there in the market. Going this route, the Cryorig is targeting the majority of the users in the overall market place. How volition information technology perform and will information technology be able to at-home the nerves of the hot chip from the Intel aka 7700k? Let's detect out.
- Product: Cryorig H7 Review
- Blazon: CPU Cooler
- Category: Air Libation
- Price: Check Toll on Amazon
Cyrorig H7 Specifications
Cyrorig H7 Pa kaging and Unboxing
The cooler comes in a traditional Cryorig cardboard box packaging. The summit side is in white color with Cryorig brand name embossed in silver color. Their tag line, "Enquiry idea gear" is printed under the brand name. This was a media sample hence a minor sticker on the pinnacle left side mentioning it.
The front end side has a picture of the libation printed all over it. The brand name is printed in white color on the top left side. The feature sum of the Cryorig H7 is printed on the bottom side.
The left side of the box is in obviously white color with H7 printed in enlarged and bold on it.
The right side of the box has mentioned 3 salient features of the cooler similar Hive Fin design, Aught Interference, Infinite RAM compatibility and ease of installation inside 4 minutes.
The backside of the box has the specifications of the libation printed on the lower section. The upper section has diagrams of the cooler specifying the dimensions of the heatsink. Compatibility with respect to the sockets in Intel and AMD are printed on the bottom department.
The bottom side of the box has the company's website printed on it with the info characterization on the center and Disclaimer on the opposite side. The cooler is fabricated in China.
Opening the height cover will reveal another cover in light blue background. Users can register their product with the Cryorig to receive an extended 3 years warranty in addition to the prime customer support and exclusive VIP Members prize draws.
Taking off the low-cal blueish flap would reveal the contents of the box. At that place is a black colour top side cover on the border of the box inlet. The libation is well placed in the middle. There are two cardboard boxes in brown colour on the left and the right sides of the libation. One has the accessories within. The fan is preinstalled on the heatsink.
Cryorig – h7 49 Cfm Cpu Cooler Accessories
The libation comes with a plethora of accessories which enable the users to install the libation without worrying well-nigh whatsoever additional requirement. The user manual is well laid out and pictures are elaborative to help the installation procedure. Accessories include:
- Backplate for Intel/AMD
- 4x long screws
- 4x black color spacers
- 2x metallic fan clips
- Cryo Paste
- Product Registration Card
- User Manuals
Cryorig h7 Fan Closer Look
The Cryorig H7 is a budget level CPU Cooler yet designed for efficiency and performance. The H7 features Cryorig's proprietary Hive Fin and QF120 120mm PWM fan for a highly efficient and compatible package.
It is a 120mm heatsink, single tower with a tiptop of 145mm which enables it to be fitted in the majority of the PC Chassis out there in the market. Let's take a closer look on the libation.
The cooler has the dimensions of 98mm x 123mm x 145mm (L 10 W 10 H). In pinnacle perspective, cryorig h7 review libation has a slim profile. The top side of the cooler is what makes information technology differentiated from the residuum of the contest.
Unlike typical industrial blueprint where the estrus pipes are terminated correct out of the top fin, there is a black color plastic comprehend, covering the entire summit side. Points, where the heat pipes are terminated, take caps on them which are raised higher up the normal area of the top cover. The Cryorig brand logo is printed in silver color on the eye of the plate.
There is hole going all the way down to the base of operations of the heatsink. This is provided to loosen/tighten the screw belongings the 10-Bar. This would enable the user to adjust the X-Bar to marshal the holes on it with the predrilled holes on the motherboard around the CPU socket. The black color adds to the neutrality of the looks and enables the cooler to exist used in any color theme.
The front side has a 120mm QF120 fan preinstalled using metal fan clips. Taking off the fan reveals the beehive-shaped construction on the front side. This structure virtually reflects the honeycomb pattern. There are total of 40 fins stacked together forming a beehive shape.
This blueprint allows for a combination of Jet Fin Acceleration™ and Turbulence Reduction, besides every bit strengthening structural strength of the fin stacks. The idea behind this Hive Fin pattern is by utilizing a larger air intake and narrower air exhaust section on the fins compresses the air to move faster while exiting the heatsink.
Jet Fin Acceleration Arrangement™ carries the hot air out of the organization faster and more efficiently which enables better cooling performance. Utilizing a beehive-shaped structure at the front end air intake of the heatsink, lowers air turbulence and straightens out the airflow.
Assisting airflow to move directly through the full length of the heatsink and conveying out hot air. Fins are made of aluminum.
CRYORIG'south proprietary Quad Air Inlet™ system features 4 strategically placed aerodynamic air inlet that allows for extra air intake. The additional air intake allows the QF series fan to have a higher air output book for its fan diameter, which equals better temperatures for the CPU heatsink and more than air exchanged for the PC Chassis.
The backside of the heatsink has fins stacked together in a traditional CPU cooler'south design. In that location are xl fins on the behind. They are stacked much narrower than the beehive design on the forepart side with much wider stacking.
Fins are made of aluminum. There are cutouts on the far end sides of the backside fin stack. The gap between the fins is 2.2mm.
The left and the right sides of the heatsink are symmetrical in design. The fins are more covered towards the rear side of the heatsink. This helps in maximum air frazzle on the backside narrower fin stack. While at that place is non much covering near the forepart side of the heatsink.
This cooler features 3 rut pipes each of 6mm. They are nickel plated soldered in the heatsink and the base of the cooler. If you lot look closely these estrus pipes are implemented in a convex way.
This is H7'due south Heatpipe Convex-Align™ System that allows for more heat pipes in a given surface area, optimized estrus pipage placement in the copper base of operations, and improved alignment with the CPU. With the Heatpipe Convex-Marshal™ System, each heat piping functions to their maximum TDP capacity.
One of the three estrus pipes on each side goes further within the heatsink aligning to the mid-section of the other ii rut pipes. This allows for maximum coverage of the fin stack which would aid to utilize more surface surface area for ameliorate oestrus dissipation.
This cooler has a copper base of operations plate measuring 33mm x 39mm x 0.6mm. The heat pipes are soldered into the copper base. The copper base has a large cake fitted on top of it where the X-Bar mechanism is mounted. There is a prophylactic sticker pasted on the cooler which reminds the user to peel it off earlier installing the libation.
The new patent pending X-Bar™ Quick Mountain System follows CRYORIG'southward renowned mounting system pattern and provides a quick and secure solution on both Intel™ and AMD platforms. The Ten-Bar™ system's dedicated backplate is made from fiberglass augmented PBT, for higher tensile strength, resistance to heat and is more easily recyclable than other plastics.
The backplate protects the mainboard from excessive stress that may come from the mounted heatsink, and also provides a solid base of operations for the fast and the secure installation.
The two confined are mounted in an X design with edges facing opposite to each other. They are held together with a spiral which can loosen/tighten using a long screwdriver from the top side of the cooler.
I ran into a trouble to operate that screw every bit I did non have that long screwdriver. Inclusion of a screwdriver in a package would be nice. Both bars tin be completely taken off but don't do that as mounting them once more can be challenging.
This cryorig h7 review is implemented in an offset pattern. This approach results in maximum compatibility for the RAM. Equally the cooler is not compatible with the Intel LGA-2011(3) socket and so nosotros take truly infinite RAM compatibility. The Cryorig refers to this Implementation as an disproportionate slanted estrus pipe layout.
The Cryorig has supplied a QF120 fan with the libation. Fan'south dimensions are 120mm x 120mm x 25.4mm. Weighing 134gm, it has rated speed of 330~1600 RPM with the noise levels of 10~25dBA and 49CFM airflow.
Air pressure rating is i.65 mmH2O. It takes 0.16Amps with DC 12V. It has a four-pin PWM connector. The cable is braided in the blackness color sleeve and has a length of approx. 320mm including the connector.
The frame of the fan is in black color while the blades are in white color. There are 11 blades of the fan. The central hub a nice Cryorig sticker pasted on it with borders in different colors. The fan mount locations on all the four corners have rubber padding to reduce the dissonance of the vibration. The airflow and the fan spin directions are clearly indicated with the pointer marks on the frame side.
The backside of the fan shows the iv-arm structure belongings the fan blades. This structure is built right into the frame of the fan. Fan'due south maximum speed in terms of the RPM is printed on the top. The Cryorig website address is printed on the lesser.
Cyrorig H7 Installation
Despite what the Cryorig states about the quick mount and ease of installation mechanism for this cooler, I found information technology to be tedious. It is easier if the motherboard is already installed within the chassis only for guys like the states who are tech reviewers and are using test bench setups, this installation is challenging.
The motherboard that I am using on my 2d test demote is the Asus Z170-P beingness powered by the Intel 7700k.
The first affair in the installation is to pass through the long screws through the backplate's middle holes on each of the four corners. This pigsty is labeled as B and is intended for the LGA socket 115x. Refer to the user transmission for more details. The backplate should be placed on the backside of the motherboard in such a mode that Intel side faces upwardly.
Next, put the plastic black color spacers on each of the screws from the front side of the motherboard. The long screws have raised portion on their lower end. They are designed as such to agree the spacers tucked into them. This will avoid the backplate slipping apart completely.
Now comes the tricky part. Loosen the screw on the X-Bar right above the libation's base of operations. Don't loosen it too much. With both bars beingness flexible, move them so that the holes on the bars marshal with the pre-drilled holes on the motherboard effectually the CPU socket.
Once done, tighten the fundamental screw on the bars to fix them in that position. Apply the thermal paste on the CPU. Now, place the cooler on the CPU HIS such that the long screws coming from the backside of the motherboard brand bespeak of contact with the bars on their holes. Hold the libation gently and kickoff screwing in the long screws from the behind of the motherboard.
It is highly advised to use a diagonal blueprint to better mount the cooler. Do that till the thread on each screw runs out. Attach the fan with the cooler and connect the 4-Pin PWM connector on CPU fan header or whatsoever fan header of your pick. This cooler can be used in Button/Pull configuration for which an additional set of fan clips is provided by the Cryorig.
Cryorig h7 plus Compatibility and Clearance
When it comes to the air coolers, nosotros need to ensure the compatibility with respect to the Chassis, the RAM and the first PCIe lane. With only 145mm height, the Cryorig H7 has a high level of compatibility all effectually for the majority of the PC Chassis in the market place.
Not only that, but the offset pattern implementation has made this cooler to have infinite RAM compatibility. I did non see any incompatibility with respect to the first PCIe lane.
Cryorig h7 Universal Test Bench
Following test bench was used to examination the cooler:
- Intel i7 7700k [Thank you to the PCFanatics]
- Asus Z170-P [Thank you to the PCFanatics]
- Corsair 2x8GB Vengeance Red LED @ 2666MHz
- HyperX 120GB SSD
- Thermaltake TP DPS RGB 750W PSU
Asus Realbench 2.44 and the RealTemp iii.70 are used for the stress test and the temperature monitoring. The Noctua NT-H1 thermal paste is used to test all the coolers on my examination benches. This helps ensure the standardization and to reduce the effect of whatsoever arranged thermal paste that could benefit the functioning.
Methodology
First, the cooler is tested on the stock clocks i.eastward iv.2GHz at manual i.16V Vcore. The average of the core temps is calculated to provide the temps at idle and under the load. The ambient temps are subtracted from these temperature readings to give the delta temps. My graphs study the delta temps. This helps in an uncontrolled environs to mitigate the temperature variation.
Adjacent, the CPU is overclocked to 4.7GHz using manual ane.22V VCore. Iii runs of the stress test program are carried out. Each of hr duration with 15 minutes idling time in between. The average of each run is separately taken and the highest reading of the three tests is used. Ambient temperatures are subtracted from the selected average temperature reading and delta temperature is reported on the graph.
Let's take a await at the results.
Results
On stock clocks i.e 4.2GHz [fixed], the Cryorig H7's max temp was 41.85C [delta temp]. The Reeven Hans performed well and max temp was on it was 38.2C [delta temp].
CPU was overclocked to 4.7GHz. The Cryorig H7's max temp was 51.25C while the Reeven Hans did a fine job again by maxing out at 49.6C. Not bad performance at all from a budget cooler.
I am non checking the acoustic of the fans due to uncontrolled environmental racket but based on my experience in testing the fans, the fan on the Cryorig H7 was near silent and did non produce any discomfort during the testing session.
Conclusion
The Cyorig H7 Review is a 120mm single design heatsink air cooler with maximum compatibility built around the cooler. The libation has the dimensions of L98 x W123 ten H145mm with but 577g the weight. The cooler has 3 heat pipes each of 6mm and they are nickel plated. The base is C1100 pure copper in nickel plating. The rated TDP of the cooler is 140W so information technology is definitely capable of treatment the hot fries.
The Cryorig has used the Bee Hive Fin design on this cryorig h7 review cooler which is a combination of the Jet Fin Dispatch and the Turbulence Reduction engineering science. Nosotros take forty nickel plated fins. The forepart side has Bee Hive fins for maximum air intake while the rear side has narrow fins stacked together. The idea behind this Hive Fin design is by utilizing a larger air intake and narrower air exhaust section on the fins compresses the air to motion faster while exiting the heatsink.
The Cyrorig has provided a QF120 fan which has RPM rating of up to 1600, the noise level of up to 25dBA, and 49 CFM. The fan is well equipped to handle the job. Information technology draws 0.16Amps with 12V DC. The cooler has the Cyrorig's 3 years of extended warranty.
Let'southward conclude it.
Pros:
- Meaty Size Cooler
- Nada RAM Incompatibility
- TDP rating of 140W
- Performance is right on the money
- 3 Years Extended Warranty
- Excellent Audio-visual Performance
Cons:
- Cumbersome installation method
Check Price on Amazon
Source: https://tech4gamers.com/cryorig-h7-cpu-cooler-review/
0 Response to "Cryorig H7 Plus Dual Fan Cpu Cooler Review"
Post a Comment